Process Of Splint

Plywood is a sheet of three or more than three layers of wood, which is cut into a single board or wood square planer and cut into thin wood, and then glued with adhesive. It is usually made of odd numbered veneers, and the fiber direction of the adjacent layers is arranged vertically to each other. So there are three, five, seven and other odd layers of plywood.

Structurally, the outermost veneer of the plywood is called the surface plate, the front surface plate is called the panel, it is the best quality sheet. The backplane is called a backboard, with a single sheet of mass. The inner sheet is called the core plate or the medium plate, which is made up of the worst single sheet.